Single Axis Motion Simulator For INS Test With Thermal Chamber
| Serial number | Project | Indicators |
| 1 | Table top Countertop load Load | Ø300 mm Not less than 300 mm in Ø not more 5 kg Not more than 5 kg |
| 2 | Speed range, deg/sec Speed range, | ± 10000 deg/sec |
| 3 | Rotation, deg Rotation, degrees | ±360, not limited ± 360, unlimited |
| 4 | Rate accuracy on 360 deg rotation, % 360 degree rotation rate accuracy, - for speed range 0,25–5 deg/sec
- Velocity range of 0.25 – 5 deg/sec
- for speed range 5–10000 deg/sec
- For a speed range of 5 – 10,000 deg/sec
| ±0,01% ± 0,001 deg/sec |
| 5 | Position accuracy, arcsec Position accuracy, arcsec | ± 3 arcsec |
| 6 | Max acceleration, deg/sec 2 Maximum acceleration, deg/sec2 | 15,000 degrees/second2 |
| 7 | Payload, nominal: Nominal Payload: 1 UUT (115x115x115 mm) weight 2,3 kg. 1 UUT (115x115x115 mm) Weight 2.3 kg. |
| 8 | Axis wobble, arcsec Axis wobble, arcsec | ± 2 arcsec |
| 9 | Slipping rings Slip Ring | 50 pcs., 2А/150V DC 50 PCs, 2/150V DC |
| 10 | Electrical feedthrough Electrical feedthrough | D-SUB DHS-26 (2 pcs.) D-SUB DHS-26 (2) located in the center of the table Located in the center of the countertop |
| 11 | Interface Communication interface | Ethernet Ethernet |
| 12 | Bandwidth, Hz, not less Bandwidth, Hz, not less than | 200 |
| 13 | Electrical connection Electrical connection | 380V,60 Hz 380 V, 60 Hz |
| 15 | Ability to work with climatic chamber -70 … + 150C Capable in the climate chamber-70 … Operation at + 150C | Yes Yes |
| The ability to modulate motion (especially rate) according to the sine function. The operator can adjust amplitude and frequency of changing the rate of the table The ability to regulate movement, especially velocity, according to a sinusoidal function. The operator can adjust the magnitude and frequency of the table rate of change The table must be compatible with customer climatic chamber. The shaft diameter 136 mm, the length 250 mm. The bench must be compatible with the customer's climate room. Shaft diameter 136 mm, length 250 mm. The presence of the price which be located on vibration free foundation. The height if the frame not less than 200 mm. The existence of price is based on the absence of vibration. The height of the frame is not less than 200 mm. |
Single-axisturntableisakindofprecisetestingequipment,whichcanprovideangularposition,rateandacceleration inonedirection.
TheSingle-axisturntableisusedforthecharacterizationandcalibrationofgyroscope,inertialtesting systemandaccelerometer.Inaddition,thesingle-axisturntablecanalsoprovidedynamicmotioninonedirectionsuch asmotionsimulation,servocontrolandangularvibration.
ControlSystem:Highperformancecontrolunit,Highprecisionangularmeasurementsystem,PWMdigitalservo amplifier,Directdriveservomotor,etc.
KeyComponents:Bearing,Drivingmotor,Poweramplifier,Encoder,AD/DAcard,etc.(Adopthighperformance seriesproducts).
StructureType:Vertical,Horizontal
ProductCategory:Single-axisrateturntable,Single-axisrateandpositionangularvibrationturntable,Horizontal single-axisturntable.
ABOUT FIREPOWER
Firepower Technology (Shenzhen) Co., Ltd. was established in 2013 and registered in Shenzhen Nanshan High-tech Park. The company is high-tech enterprise dedicated to R&D and production of quartz accelerometer, FOG, IMU, INS, rate table and other products.
Firewpower technology has invested in several automatic production lines in xi'an, shenzhen,hebei, including fiber optic gyroscope, mems inertial navigation, quartz accelerometer, electronic countermeasure communication products, inertial simulation equipment production lines in china. Firepower technology always puts scientific research innovation, technological exploration and self-control in the first place.
The company has developed a series of autonomous navigation products with independent intellectual property rights, which are specially used in the field of autonomous navigation including uavs, vehicles, ships with the self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products to solve the current position, three-dimensional attitude and speed of the user carrier, realizing the autonomous navigation control of the carrier.
Product Tags:
|
|
Single Axis Motion Simulator For INS Test With Thermal Chamber Images
|
